Descriptions:
1.1, Automatic De-capper
This machine is driven by cylinder, controlled by PLC; Automatic
working by barrel checking;
De-capping head is composed by claw device and cylinder, de-capping
head position can move up and down, claw device can be adjusted
slightly to be suitable for different caps.
When the gallon bottle comes into the machine, the de-capping head
will go down and claw device will hold tightly barrel cap sides,
and then lift the barrel to take off the caps; And when the caps
are taken off, the compressor air will blow the caps into cap
hopper, then fall outside into client’s own holder;
The claw pressure is adjusted to protect caps;
Dimension: 650*800*1600mm
Weight: 100kg
1.2, Brush External Bottle Washer
The machine is completely blocked to stop water leakage, when the
gallon bottles are sent to washing position, the cylinder will stop
3bottles inside and fixed them by brushes and fixing bar, the water
will be pumped and jetted to bottle body, bottle rotates together
with brushes; The bottles will be cleaned by brushes and water
function;
No air compressor needed, it is easy for production and
maintenance;
Parameters:
Brush qty: 4pcs*2
Dimension: 2000*1200*1750mm
Weight: 800kg
Power: pump 0.37+motors 0.75*2=1.87KW
Recycle water tank size: 600*550*550mm
Components:
PLC: Mitsubishi
Cylinder: AIRTAC
Air switch-Contactor-Relay: Schneider
1.3, Washer/Filler/Capper with auto bottle loading
The machine is integrated washing filling and capping together. It
is ideal machine to produce barrel water. The whole machine is
using stainless steel 304 ,rot resistant,can be cleaned easily.Main
electric parts are all branded. Air channel system use Air TAC
brand product.The machine is with compact construction,will occupy
small room,working efficiency is high.Only need 2 operators to
control, is a good choice for factory to choose.
The machine set up do not need plug floor screw,after case taking
off,set the machine on the flat floor,and then adjust stand height
and adjust all stand pressure to be average. After the machine is
set up well, get in through water pipe, drain pipe and power , air
power.
Working process:
Barrel filling unit can be divided into 3 steps: washing, filling
and capping, total 12 working stations,working process as below:
Set empty barrel mouth to barrel seat, empty barrel will be washed
during headstand situation,2 working station for barrel inserting.
Washing process will be divided into 3 steps:1, thimerosal
washing,4working positions；2,clean water washing,4working
positions.Every washing step is set to 8S,after washing,there will
be 10S for dripping.
The barrel after washing will move down 45 degree through the
passing chain and will passing out chain and turn over 45 degree by
barrel lift cylinder to filling position for filling.
Filling value will driven by cylinder to insert into barrel and
start to fill, filling time is controlled by PLC, and filling time
is adjustable by control panel according to filling liquid
surface.After filling, the extra water will back to pure water tank
by automatic vent,it can reduce water consumption.(water tank is
not included)
After filling process finish,the filled barrel will be pushed to
capping position by barrel stop cylinder,the whole process finish
till now.
Parameters:
Cylinder: Air tech-Taiwan
Magnetic valve: Air tech-Taiwan
Rising pump-filling pump: Nanfang
PLC: Mitsubishi Japanse
Power: 1.5KW
Dimension: 6000*1800*1800mm
Weight: 1000kg
1.4, Heat Shrinking Machine
Whole SUS304 construction, including electrical boiler to generate
steam and shrink tunnel especially for barrel cap film;
Power: 20KW
Dimension: 800*600*1200mm
Weight: 100kg
1.4, Checking light
Power: 0.09KW
Dimension: 1000*100*450MM
Weight: 10kg
Payment:
100% irrevocable-transferable at sight L/C or 30%TT against PI,
70%TT before delivery
Delivery:
25-35 working days after L/C receipt;
please kindly click the play button to watch the video
