>>>Working process:
★1, The PET bottles are separated by screw and then entered into
the bottle washing mechanism in turn. By clamping the bottle mouth,
the bottles are reversed 180 degrees, so that the bottle mouth is
down, spraying and washing the inside and outside of the bottle.
The rinsing water used is pure water.
★2, Then it enters the balanced pressure filling mechanism. The
bottle rises slowly with the lifting mechanism. After close contact
with the sealing washer under the balance filling valve, the fork
installed above the isobaric cylinder is activated. At this time,
the gas inside the bottle begins to be filled.
★3, In the sealing part. The whole capping mechanism is
cylindrical. It rotates 360 degrees according to the center of the
spindle. The bottle is automatically capped, and then enters the
capping mechanism.
>>>Our machine have so many characteristics:
★1, The system is simple: the integral table board is adopted, the
structure is rigid, easy to wash and clean, easy to maintain, and
the maintenance of the machine is more convenient and simple.
★2, Accurate alignment of bottles in filling process: unique filling
with clamping mouth and pre-cover function of centering cover
ensure accurate sealing between bottle mouth and filling valve
mouth, eliminate le akage phenomenon, and really reduce the loss of
finished materials.
★3, Accurate level control: the level in the filling cylinder is
determined by the probe level meter, and the intake of the intake
pipe is controlled automatically by the variable signal to ensure
that the level in the cylinder is consistent throughout the filling
process.
★4, Accurate speed regulation: Advanced motor frequency modulation
control technology is used to make the speed regulation of the
machine accurate and stable in start-up and production, and to
display the filling speed digitally. The whole machine is
controlled by PC program with high degree of automation.
★5, Structural hygiene: All parts in contact with beverages are made
of high quality stainless steel, all liquid and gas pipes are
polished inside and outside, and all seals in contact with
beverages are made of nitrile rubber or silicone rubber for food,
which meets the hygienic requirements.
★6, The structure of the capping machine is advanced: the capping
head adopts magnetic capping, adjusts the required torque according
to different caps, and is suitable for various types of plastic
caps; the capping machine adopts tooth-shaped device, and the lower
cap slideway is equipped with cap detection device to ensure that
there is no back cap and no bottle without capping.
★7, Convenient and rapid change of bottle type: The quick-opening
structure is adopted for the change parts, and the quick and
convenient change of bottle type is suitable for PET bottles of
various specifications.
